Dissolved calcium magnesium ions in water cause hardness in water. Aqualine water softening systems; These are systems that remove Calcium (Ca) and Magnesium (Mg) ions in water that cause hardness. For this reason, the softening system provides the removal of the hardness in the water and the softening of the drinking water, as well as the improvement of the taste of the water.
Softening systems automatically perform regeneration processes on the desired day of the week, at the desired time, without any intervention. The resin that reaches saturation regenerates with salt water and is cleaned from calcium and magnesium ions.
TECHNICIAL FEATURES
Epoxy painted carbon steel tank
Aqualine brand cationic resin
Maximum working pressure 6 bar
System is flow controlled
Pneumatic actuated butterfly valves (Optional Electric Actuator option)
S -1220 and S -1620 sub-collection structure lateral diffuser
S -2020 and S - 2420 sub-collection structure noozle diffuser over mirror
PVC-U material surface piping (Optional galvanized surface piping option)
Sample taps and manometers at system inputs and outputs
PLC based Siemens logo control panel (Optional touch screen)
Electricity 220V / 50 Hz / 1 pH
Consumption of 150 grams of salt is accepted for 1 liter of resin.
Resin capacity 6000 Fr / liter resin is accepted.
Dry instrument air supply required for the operation of pneumatic valves belongs to the customer. Recommended compressor capacity is minimum 100 Lt / min @ 8 bar.
Epoxy painted carbon steel tank
Aqualine brand cationic resin
Maximum working pressure 6 bar
System is flow controlled
Pneumatic actuated butterfly valves (Optional Electric Actuator option)
S -1220 and S -1620 sub-collection structure lateral diffuser
S -2020 and S - 2420 sub-collection structure noozle diffuser over mirror
PVC-U material surface piping (Optional galvanized surface piping option)
Sample taps and manometers at system inputs and outputs
PLC based Siemens logo control panel (Optional touch screen)
Electricity 220V / 50 Hz / 1 pH
Consumption of 150 grams of salt is accepted for 1 liter of resin.
Resin capacity 6000 Fr / liter resin is accepted.
Dry instrument air supply required for the operation of pneumatic valves belongs to the customer. Recommended compressor capacity is minimum 100 Lt / min @ 8 bar.
We can produce Metal Tanks for purification systems that are certified in accordance with Pressure Equipment Standards.
AD 2000 MERKBLATT
ASME SEC.VIII
EN 13445 (TÜV NORD SYSTEMS NOTIFIED BODY NUMBER 0045 approved)
AD 2000 MERKBLATT
ASME SEC.VIII
EN 13445 (TÜV NORD SYSTEMS NOTIFIED BODY NUMBER 0045 approved)
| 2019-tnk-ybsystems-eng.pdf |
|
ABOUT AQUALINE |
CONNECT WITH US |
|
Cookie disclaimer | Privacy disclaimer© COPYRIGHT 2022. ALL RIGHTS RESERVED.
|